SIASUN Industrial Cleaning Mobile Robot (D700C)

Most factories still treat cleaning as something that happens when production stops, squeezed into the gap between the last shift and the first. On a site that runs continuously, that gap barely exists, and dust, fibres, cable offcuts and discarded bottles build up in the aisles while the lines keep moving. The SIASUN Industrial Cleaning Mobile Robot (D700C) is built on the opposite premise: that cleaning can run alongside production, sharing the floor with automated guided vehicles, recognising what lies in its path and dealing with it without anyone stopping to clear the way.

Robots Europa, based in Dublin, supplies the D700C to industrial and logistics operators across the European Union and the DACH region. Robots Europa prepares the quotation, coordinates delivery to your site and remains your point of contact for technical questions and support once the robot is in service.

Background

SIASUN and its mobile-robot expertise

SIASUN designs its industrial cleaning robots as purpose-built machines for industrial cleaning operations, rather than adapting domestic or commercial cleaners for heavier duty. The D700C draws on more than 20 years of SIASUN expertise in mobile-robot control, navigation and safety sensing. That background matters in a cleaning robot: the hard part of autonomous floor care on a working site is not the cleaning itself but moving safely among people, forklifts, racking and other robots, and that is precisely the discipline in which SIASUN has built its experience.

Designed for the live production floor

Two design choices define the D700C. The first is its co-line operation mode, which allows the robot to work alongside AGVs in synchronised operation, so that production logistics and cleaning run in parallel instead of competing for the same time window. The second is an independent airflow design that achieves up to 90% cleaning efficiency and 99% dust filtration, making the robot well suited to textile and apparel environments, where it handles lint and fibres without tangling. Around these sit AI recognition of cables and debris, a layered safety system and integration with building systems such as elevators and door access control.

Technical Specifications

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

SIASUN has not published the battery capacity, runtime, charging time, noise level, IP rating, navigation method, dust bin capacity or climbing ability of the D700C; Robots Europa confirms these with the manufacturer at quotation.

What makes the D700C different from a conventional floor cleaning machine?

A conventional cleaning machine, whether walk-behind or ride-on, depends on an operator and on a schedule that keeps it out of the way of production traffic. The D700C changes both conditions. Its co-line operation mode is designed for synchronised work with AGVs, so the robot can be planned into the same material-flow environment as the vehicles that move goods, rather than being confined to empty halls at night.

Obstacle handling is the second difference. Industrial floors collect a far wider range of waste than a retail or office floor, and the D700C uses AI recognition to detect cables and debris, from tiny wire scraps to large beverage bottles. Telling a cable from a piece of rubbish is what separates a robot that keeps working from one that stalls or drags a lead across the floor.

The third difference is the depth of its safety sensing. Instead of relying on a single sensor type, the D700C combines 3D LiDAR, vision, ultrasonic sensors, anti-fall protection and bumper contact sensing. Each layer covers situations another may miss: transparent or low objects, drops at loading edges, and physical contact as a last line of defence. For a machine of 85 kg travelling at up to 1.2 m/s among people and vehicles, that redundancy is the basis for operating during working hours.

Finally, the D700C is designed to connect to the building rather than stand apart from it. Support for elevator control and door access control allows it to move between floors and zones, while mobile app operation and cloud-based monitoring give facility teams visibility of the robot without having to walk the floor.

Can the D700C handle textile and fibre-heavy environments?

Lint and loose fibres are among the most awkward materials for any cleaning machine: they wrap around rotating parts, clog filters and reduce suction over the course of a shift. SIASUN addresses this with the independent airflow design, built for textile and apparel environments, which handles lint and fibres without tangling while reaching up to 90% cleaning efficiency and 99% dust filtration.

The self-cleaning filter mesh supports the same goal. By clearing itself rather than waiting for manual attention, it reduces maintenance costs and extends service life, which is particularly relevant where fine fibres would otherwise load a filter quickly. For spinning, weaving, garment and finishing operations, this combination is the strongest argument for the D700C over a general-purpose cleaner.

Who is the D700C for?

The D700C is aimed first at manufacturers running continuous or multi-shift production, where there is no convenient window for manual cleaning and where AGVs already handle internal logistics. For these sites, co-line operation is the decisive feature, because it lets cleaning become part of the material-flow plan rather than an interruption to it.

Textile and apparel producers form a second clear segment, given the robot's handling of lint and fibres and its high dust filtration. Electronics and assembly plants, where wire scraps and cable offcuts accumulate around workstations, benefit from the robot's ability to recognise cables and small debris.

Warehouse and production-logistics operators with multi-level buildings or controlled zones will value the elevator and door access integration, which allows one robot to serve several areas. Facility managers who need reporting rather than anecdote will find cloud-based monitoring and mobile app operation useful for overseeing cleaning across a site.

If you are comparing approaches before choosing a model, the wider SIASUN range is listed under Cleaning Robots, and other manufacturers' machines can be found in our general Cleaning Robots category. Robots Europa can help you assess which configuration fits your floor plan and workflow.

What is the D700C used for?

1. Cleaning during production: working in synchronised co-line operation with AGVs so that production and cleaning run in parallel.
2. Textile and apparel plants: capturing lint and fibres without tangling, with high dust filtration.
3. Electronics and assembly halls: recognising and collecting wire scraps and small debris around workstations.
4. Warehouses and logistics areas: covering wide aisles with a 700mm cleaning width and up to 2500㎡/h throughput.
5. Multi-floor facilities: moving between levels and zones through elevator and door access control.
6. Monitored facility management: tracking cleaning activity through the mobile app and cloud-based monitoring.

Pricing and Availability

The D700C is supplied on a quotation basis, as the right configuration depends on your site, your existing AGV fleet and the building systems the robot should connect to. Send Robots Europa a brief description of your facility, the floor areas to be cleaned and the integrations you require, and we will prepare a tailored quotation. Delivery, customs and support are arranged together with the quotation. To begin, please use the quotation request available on this page.

Frequently Asked Questions

Can the D700C work at the same time as our AGVs?

Yes. The D700C has a co-line operation mode designed for synchronised operation alongside AGVs, so production logistics and cleaning can run in parallel.

What kind of debris can it recognise?

Its AI recognition detects cables and debris ranging from tiny wire scraps to large beverage bottles. This helps the robot deal with the varied and bulky waste typical of industrial floors.

How large is the water tank?

The clean/dirty water tank capacity is 45L.

Which safety systems does the D700C use?

It combines 3D LiDAR, vision, ultrasonic sensors, anti-fall protection and bumper contact sensing. These layers together cover obstacle detection, drop edges and physical contact.

Can the robot use lifts and pass through controlled doors?

Yes. The D700C supports elevator control and door access control, and it can also be operated through a mobile app and monitored via the cloud.

Does the filter need frequent maintenance?

The D700C uses a self-cleaning filter mesh, which reduces maintenance costs and extends service life. This is especially useful where lint and fine dust would otherwise load a filter quickly.

Where can I buy the SIASUN Industrial Cleaning Mobile Robot (D700C) and what does it cost?

You can buy the D700C from Robots Europa, which supplies customers across the EU and the DACH region. The price depends on configuration and integration, so please request a quotation through this page.

Summary

The D700C is built for the factory that cannot pause to be cleaned. Co-line operation with AGVs, AI recognition of cables and debris, an independent airflow design for fibre-heavy environments and a five-layer safety system together allow cleaning to take place while production continues, rather than in a shrinking window after it. With elevator and door access integration, app control and cloud monitoring, it fits into the building as part of its automation rather than as an extra machine to manage. If your aim is to keep the floor clean without stopping the line, this page is the starting point.