SIASUN Roller Conveyor Mobile Robot (Roller Conveyor Mobile Robot)

Every fixed conveyor ends somewhere: at a wall, a buffer, or an operator waiting with a pallet truck to carry the load across the gap to the next line. The SIASUN Roller Conveyor Mobile Robot (Roller Conveyor Mobile Robot) is built to close that gap. It carries a powered conveyor deck on an AGV base, drives to the end of one line, aligns itself with it and lets its own rollers or chain take the load across. The pallet then moves from floor equipment to vehicle and back again without a forklift touching it. In effect, separate conveyor islands start to behave like one continuous material flow, and the transport between them becomes as repeatable as the conveyors themselves.

Robots Europa, based in Dublin, supplies the SIASUN Roller Conveyor Mobile Robot to manufacturers and logistics operators across the European Union and the DACH region. Robots Europa prepares the quotation for the conveyor configuration and navigation method your site requires, arranges delivery to your facility and remains your point of contact for technical support once the system is running.

Background

SIASUN and its route into intralogistics

SIASUN is a Chinese robotics and automation manufacturer with its origins in the country's academic automation research. Its portfolio spans industrial robot arms, cleanroom handling systems and a broad family of mobile robots for factory and warehouse logistics. That family ranges from heavy-duty transport platforms to conveyor-topped vehicles such as this one, all built around the same idea: the automated guided vehicle as a configurable base that can be fitted with whatever load-handling equipment a process requires. Buyers who wish to compare the wider range can browse the Mobile Robots category.

A conveyor deck on an AGV base

The Roller Conveyor Mobile Robot is a high-efficiency material transfer platform. Rather than lifting or forking a pallet, it receives and discharges loads by conveying them: the deck on top of the vehicle is a section of roller or chain conveyor that runs in step with the stationary conveyor it docks against. Four load-handling arrangements are named: single roller, dual roller, four rollers and chain conveyor. The base supports differential and omnidirectional driving, travels bidirectionally or omnidirectionally depending on the configuration, and navigates either by SLAM or by magnetic strip. Multi-sensor protection keeps transport safe and stable, and the platform can be customised for different carriers and sizes. It is this combination of a conveyor interface with precise docking that sets it apart from a conventional towing or lifting AGV.

Technical Specifications

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions, vehicle weight, battery capacity, travel speed, run time, IP rating, power supply and charging arrangement, connectivity or the contents of the delivery; Robots Europa confirms these for your chosen configuration at quotation.

How does a conveyor robot dock with fixed conveyor lines?

A conveyor transfer only works when the two decks meet squarely. If the vehicle stops too far away, too close or at an angle, the pallet can snag on the joint, skew across the rollers or stop short. This is why the SIASUN platform specifies two separate accuracy figures. Positioning accuracy of ±10 mm / ±1° describes how precisely the robot reaches a target point in its route; docking accuracy of ±5 mm describes the tighter alignment it achieves at the conveyor interface itself, where the transfer happens.

Once aligned, the robot's deck and the stationary conveyor run together and the load passes across under its own conveyor drive. No mast, no forks and no lifting movement are involved, which keeps the handover simple and short. The choice between single roller, dual roller, four rollers and chain conveyor depends on what is being carried and how the receiving equipment is laid out: roller conveyors suit flat-bottomed pallets and trays, while chain conveyors are the usual choice for pallets whose underside does not run well on rollers. Robots Europa reviews the interface of your existing floor conveyors before recommending a configuration.

Should you choose SLAM or magnetic strip navigation?

The platform supports both, and the decision is usually a question of how the site works rather than of the robot itself. Magnetic strip navigation follows a guide laid into or onto the floor. It is predictable and well understood, and suits fixed routes that rarely change, though every new route means new strip on the floor. SLAM navigation builds a map of the surroundings and locates the vehicle within it, so routes can be redrawn in software when a line is moved or a new station is added.

For a factory whose layout is stable and whose routes are short and repetitive, magnetic strip may be entirely adequate. For a facility that expects to reorganise production, add stations or run several robots on overlapping routes, SLAM gives more freedom. The ability to drive differentially or omnidirectionally adds a further consideration: omnidirectional travel lets the robot manoeuvre sideways into a docking position in confined aisles, which can matter where conveyor ends sit close together.

Who is the SIASUN Roller Conveyor Mobile Robot for?

The most direct fit is the manufacturer who already runs conveyor lines but still moves loads between them by hand or by forklift. Lithium battery producers are a natural first segment: the robot supports end-to-end material flow from electrode making and cell production to module and PACK processes, a chain of process steps in which carriers repeatedly pass between separate pieces of equipment.

Beyond batteries, the platform suits any plant whose loads travel on pallets or carriers and whose stations already have a conveyor interface: automotive component suppliers, electronics assembly, packaging and general discrete manufacturing. Because the payload range runs from light carriers up to the rated payload of ≤15000 kg, the same family can serve light tray handling as well as heavy unit loads, with the load-handling configuration for a given load selected together with Robots Europa. Systems integrators planning a complete line are a further audience, as multi-robot collaboration allows several vehicles to share a transfer network. Where a site needs transport without a conveyor interface, the wider Factory Robots category presents other approaches.

What is the SIASUN Roller Conveyor Mobile Robot used for?

1. Lithium battery production: moving material between electrode making, cell production, module assembly and PACK processes.
2. Linking conveyor islands: carrying pallets between stationary conveyor sections that are not physically connected.
3. Production line feeding: delivering carriers to the infeed of a machine and collecting finished work from its outfeed.
4. Warehouse transfer: exchanging palletised goods between storage conveyors, picking stations and dispatch lines.
5. Heavy unit load handling: transferring loads up to the rated payload where manual handling is impractical.
6. Coordinated fleet operation: running several robots together on a shared network of docking points.

Pricing and Availability

The SIASUN Roller Conveyor Mobile Robot is supplied on quotation, because the conveyor configuration, the navigation method and the carrier dimensions all shape the final system. Tell Robots Europa which loads you move, how your existing floor conveyors are laid out and whether you plan a single vehicle or a fleet, and the quotation will be prepared for that configuration. Delivery, customs and support are arranged with the quotation. To begin, use the quotation request available on this page.

Frequently Asked Questions

Which load-handling configurations are available?

The robot is offered with single roller, dual roller or four rollers, or with a chain conveyor. The right choice depends on your carriers and on the conveyor equipment the robot docks with.

How accurately does the robot dock with a conveyor?

Docking accuracy is ±5 mm. Positioning accuracy along the route is ±10 mm / ±1°.

Which navigation methods does it support?

It navigates by SLAM or by magnetic strip. Robots Europa can help you decide which suits your layout and how often it is likely to change.

Can several robots work together?

Yes. The platform supports multi-robot collaboration, so a fleet can share routes and docking points within one material flow.

Can the robot be adapted to our own carriers?

The platform offers flexible customisation for various carriers and sizes. Share your carrier details when you request a quotation.

What about battery capacity, travel speed and IP rating?

Robots Europa provides these figures, together with dimensions, vehicle weight and connectivity, for your configuration as part of the quotation.

Where can I buy the SIASUN Roller Conveyor Mobile Robot and what does it cost?

Robots Europa supplies it across the EU and the DACH region. The cost depends on the configuration you choose, so request a quotation on this page and Robots Europa will prepare an offer for your application.

Summary

The weak point of many conveyor installations is not the conveyors but the spaces between them, where loads still wait for a person or a forklift. The SIASUN Roller Conveyor Mobile Robot fills those spaces with a vehicle that is itself a piece of conveyor: it travels by SLAM or magnetic strip, docks to ±5 mm and transfers loads on single, dual or four rollers or on a chain conveyor, across a payload range from 15 kg to 15 t. With multi-robot collaboration and customisation for different carriers, it can grow from one link between two lines into a network that ties a whole plant together, as its role in lithium battery production shows. For a quotation from Robots Europa tailored to your conveyors and your loads, this page is the starting point.