Senad Belt Conveyor

A gapping conveyor from SENAD that opens up space between parcels before they reach a dimensioning, weighing and scanning station, so each one is read on its own. Robots Europa supplies it for parcel hubs and warehouse automation lines across the EU and the DACH region.

In stock

BRAND:
SENAD
PART #:
Belt Conveyor
ORIGIN:
China
AVAILABILITY:
SUBJECT TO AVAILABILITY
SKU:
Senad-Belt-Conveyor

Senad Belt Conveyor

A DWS station is only as good as the gap in front of it. Parcels that arrive nose to tail are measured as one oversized item, weighed together and scanned out of order, and the error travels downstream to the sorter and on to the loading dock. The Senad Belt Conveyor addresses that point in the line. It is not a transport belt that happens to sit before the scanner, but a short gapping stage that uses a difference in speed to pull parcels apart, so that the dimensioning, weighing and scanning equipment that follows sees them one at a time.

Robots Europa, based in Dublin, supplies the Senad Belt Conveyor to logistics operators, parcel carriers and system integrators across the European Union and the DACH region. Robots Europa prepares the quotation, arranges delivery to your site and provides support for the conveyor as part of a wider SENAD automation line or as an addition to an existing installation.

Background

SENAD and its warehouse automation range

SENAD builds equipment for parcel and warehouse automation, and this conveyor belongs to that family rather than to a general-purpose conveyor catalogue. Within the Senad range offered by Robots Europa, it sits alongside dimensioning, weighing and scanning stations, 3D vision workstations, palletising robots and automated guided vehicles. That context matters when you plan a line: the conveyor works mainly with other warehouse automation machines, namely dimensioning weighing scanning machines, telescopic belt conveyors, parcel singulation machines and parcel sorting machines. It is intended as a link in a chain, not as a stand-alone item.

Speed difference as the key principle

The conveyor is built around speed difference, to enlarge the gap between parcels. The principle is familiar in intralogistics: when an item passes from a slower section onto a faster one, it accelerates away from the item behind it, and the spacing between the two grows. Before parcels are scanned and weighed, they have to be separated from the parcels in front of and behind them by a certain distance, so that the DWS system can read them one by one. The Senad Belt Conveyor exists to create that distance reliably, ahead of the measuring point, without manual intervention.

Technical Specifications

SpecificationValue
Belt width800mm
Length1+1m
Operating principleSpeed difference, to enlarge the gap between parcels
FunctionSeparates each parcel from the parcels in front and behind by a certain distance, so the DWS system can read them one by one
Works withDimensioning weighing scanning machines, telescopic belt conveyors, parcel singulation machines, parcel sorting machines

Specifications as published by the manufacturer; confirmed against the datasheet at quotation.

The manufacturer has not published the belt speed, belt material, motor power, load capacity, weight, overall dimensions, power supply, package contents or control interface; these are confirmed at quotation.

Why does a DWS line need a gapping conveyor?

Dimensioning, weighing and scanning equipment is designed to treat each parcel as a single object. A scale cannot separate the weights of two parcels sitting on it at the same moment, a dimensioning system that sees two touching boxes will report one larger box, and a barcode reader may associate a label with the wrong item. In each case the data that leaves the station is wrong, and in a parcel hub wrong data is expensive: it affects billing by dimensional weight, sort decisions and the reconciliation of manifests.

Upstream of the DWS point, however, parcels rarely arrive neatly spaced. They come off a telescopic conveyor at the unloading dock, out of a singulation stage or from a merge, and the spacing between them varies. The Senad Belt Conveyor sits in this gap between irregular infeed and precise measurement. By running at a speed difference, it stretches the flow so that each parcel enters the measuring zone on its own. The result is that the DWS station can read the parcels one by one, which is the condition its accuracy depends on.

Placing this function in a dedicated conveyor rather than leaving it to chance has a practical benefit for planning. The gapping step becomes a defined element of the line, which can be specified, quoted and commissioned together with the DWS station and the sorter that follows.

How does the Senad Belt Conveyor fit with other SENAD equipment?

The conveyor mainly works with four types of machine, and together they describe a typical parcel flow. Telescopic belt conveyors bring parcels out of a trailer or container. Parcel singulation machines break up clusters into a single file. The Senad Belt Conveyor then enlarges the gap between the parcels in that file. Dimensioning weighing scanning machines capture size, weight and barcode, and parcel sorting machines direct each item to its destination.

For buyers planning a measuring point, the natural companion is a DWS station such as the Senad 4-Ports DWS, which Robots Europa can quote in the same project. The belt width of 800mm is the figure to compare against the infeed of the downstream station and the width of the conveyors feeding it. Robots Europa matches the conveyor to the chosen DWS station and sorter when preparing the offer, so that the line is specified as a whole rather than piece by piece.

Who is the Senad Belt Conveyor for?

The first group is parcel carriers and courier hubs that measure and weigh every item for billing and routing. For these operators, a reliable gap before the DWS station protects the accuracy of data that feeds invoices and sort plans.

The second group is e-commerce fulfilment and distribution centres that process outbound or returned parcels in volume and have introduced, or are planning, automated dimensioning and sorting. Here the conveyor helps an automated measuring point perform as intended without staff spacing parcels by hand.

The third group is system integrators assembling warehouse automation lines for clients across the EU and the DACH region. For them, a gapping conveyor from the same manufacturer as the DWS, singulation and sorting machines simplifies the design of the interfaces between stages.

Buyers whose primary task is not parcel flow but handling heavy bags, depalletising or moving loads between areas will find other items in the Senad range more relevant; the conveyor is specifically for the stretch of line in front of a DWS station.

What is the Senad Belt Conveyor used for?

  1. Gapping before DWS: enlarging the space between parcels so the dimensioning, weighing and scanning station reads each one separately.
  2. Accurate weighing: ensuring that only one parcel is on the scale at the moment of measurement.
  3. Reliable dimensioning: preventing touching parcels from being measured as a single larger item.
  4. Correct barcode assignment: helping the scanner associate each label with the right parcel.
  5. Preparing the sorter infeed: passing evenly spaced, measured parcels on to parcel sorting machines.
  6. Linking unloading and measurement: connecting telescopic belt conveyors and singulation machines to the DWS point in a parcel hub.

Pricing and Availability

Robots Europa supplies the Senad Belt Conveyor on a quotation basis, as the configuration of a gapping stage depends on the DWS station, sorter and infeed it is to work with. When you request a quotation, it helps to describe the parcel types you handle, the equipment upstream and downstream of the planned measuring point and the site where the conveyor will be installed. Delivery, customs and support are arranged with the quotation. To begin, use the quotation request available on this page.

Frequently Asked Questions

What does the Senad Belt Conveyor do?

It uses a speed difference to enlarge the gap between parcels. This separates each parcel from those in front and behind, so that a DWS system can read them one by one.

What is the belt width?

The belt width is 800mm.

What length is the conveyor?

The length is 1+1m. Robots Europa plans the layout of the sections with you for your installation.

Which machines does it work with?

It mainly works with warehouse automation machines: dimensioning weighing scanning machines, telescopic belt conveyors, parcel singulation machines and parcel sorting machines.

Can Robots Europa supply the matching DWS equipment?

Yes. Robots Europa offers SENAD dimensioning, weighing and scanning stations such as the Senad 4-Ports DWS, which can be quoted together with the conveyor in one project.

Can it be added to an existing line?

It is designed to sit in front of a DWS station within a parcel line. Robots Europa reviews how it fits your existing equipment, power supply and control system when preparing your offer.

Where can I buy the Senad Belt Conveyor and what does it cost?

You can buy the Senad Belt Conveyor from Robots Europa, which supplies customers across the EU and the DACH region. The price depends on the configuration and is provided in a quotation, which you can request on this page.

Summary

The accuracy of a dimensioning, weighing and scanning station is decided a few metres before it, at the point where parcels either arrive one by one or arrive bunched together. The Senad Belt Conveyor is SENAD's answer to that point: an 800mm belt, 1+1m in length, that uses speed difference to open up the gap between parcels so the DWS system can read each of them in turn. It works with telescopic conveyors, singulation machines, DWS equipment and sorters, and it makes most sense as a planned stage in such a line. Robots Europa quotes, delivers and supports it across the EU and the DACH region. If your measuring point needs a reliable gap in front of it, this page is the starting point.

Specifications

General

BRAND SENAD
PART # Belt Conveyor

What's included

Senad Belt Conveyor (Belt Conveyor)

Product Questions

No questions yet. Be the first to ask.

0/255

Write a Review
You're reviewing: Senad Belt Conveyor
loader
Loading...

You submitted your review for moderation.