Senad Six Sides Dynamic DWS System

Every returns desk knows the parcel that arrives label-down, pressed against the side rail, its barcode facing anywhere but the scanner. On a line with a single overhead reader, that parcel stops the flow: someone has to lift it, turn it and present it again. The Senad Six Sides Dynamic DWS System starts from the opposite assumption. The label could be on any face, and the machine, not the operator, should go looking for it. Weight, volume and barcode are captured while the parcel keeps moving, so the record of each item is created in the same pass that carries it down the conveyor.

Robots Europa, based in Dublin, supplies the Senad Six Sides Dynamic DWS System to logistics, fulfilment and distribution operators across the European Union and the DACH region. Robots Europa prepares each quotation around the project in question, coordinates delivery to site and remains your point of contact for technical support once the system is in operation.

Background

Senad Robot(ShangHai) and its parcel-handling range

The system is manufactured by Senad Robot(ShangHai) Co., Ltd., a Shanghai-based company whose catalogue centres on automation for parcel and warehouse logistics. Alongside this DWS system, the brand offers sorting machines, loading and palletising robots and smaller dimensioning stations, all of which can be found in the Senad range. That context is worth bearing in mind when reading the specification: this is not a standalone measuring box but a module conceived for a longer line. In front of it, a telescopic conveyor can be installed that extends into a truck container to unload packages; at the end of it, modular parcel sorting machines can be installed. The DWS system sits between the two, turning an anonymous stream of parcels into identified, weighed and measured items.

Three sections, one measurement pass

The machine consists of three parts. The first is a speed-up conveyor section, the kind of section generally used on DWS lines to open up spacing between consecutive parcels before they are measured. The second is the code scan dimension weight conveyor scale section, where the core work happens: dynamic weighing, automatic code scanning and dimension volume measurement are integrated in one conveyor stage. The third is an abnormal handling section, which gives exceptions their own place on the line instead of leaving them in the main flow.

The key technology is the camera arrangement. Six cameras are installed on the top and five sides of the scanning area, and this arrangement improves the code reading rate. Because weight, volume and barcode are all measured dynamically, the system achieves online, real-time measurement with a throughput of more than 2400 pieces / hour.

Technical Specifications

Specifications as published by the manufacturer; they are confirmed against the datasheet at quotation.

The manufacturer has not published the dimensions, the weight, the power requirements, the conveyor speed, the weighing capacity and accuracy, the camera resolution, the communication interfaces or the maximum parcel size; all of these are confirmed at quotation.

What makes a six-sided DWS system different from a top-scan station?

A conventional dimensioning and weighing station with a single overhead reader works well when every parcel arrives with its label facing upwards. In outbound fulfilment, where packing is controlled, that can often be arranged. In returns and inbound induction it rarely can: parcels arrive in whatever orientation the sender, the driver or the unloading crew left them, and the label may be on the side, the front or the underside. Each misread becomes a manual intervention, and each manual intervention costs time at exactly the point where volumes peak.

The Senad Six Sides Dynamic DWS System addresses this by placing six cameras across the top and five sides of the scanning area, which improves the code reading rate. The practical consequence is that orientation matters far less, so staff at the infeed spend their effort on keeping the flow steady rather than on turning parcels by hand.

The second difference is that measurement is dynamic. Weight, volume and barcode are taken while the parcel moves, with no stop-and-start at a static scale. This is what allows the system to process more than 2400 pieces / hour while still producing a complete data record for each item. Parcels that cannot be resolved are not left to block the line; the abnormal handling section is part of the machine itself.

How does the Senad Six Sides Dynamic DWS System fit into an existing line?

Integration is often the deciding question for a site that already runs conveyors, and here the system is built on a modular design concept. It is intended to meet varied customer requirements and to be integrated conveniently into an existing assembly line, rather than demanding a new hall layout around it. Upstream, the option of a telescopic conveyor reaching into the truck container means unloading can feed the DWS system directly. Downstream, modular parcel sorting machines can be installed at the end, so that the data captured during measurement can drive the next stage of the process.

On the software side, the system offers a rich software interface, and the software itself can be customised. For operators who need the measurement data to reach a warehouse management or carrier system, this is the natural starting point for the integration discussion with Robots Europa.

Commissioning is designed to be light. The machine is fully assembled, commissioned and tested before shipment, so there is no assembly to carry out on arrival. Day-to-day operation begins by opening the Vision App, after which the machine starts to work, and a remote App on the PC desktop provides the channel for remote service.

Who is the Senad Six Sides Dynamic DWS System for?

The clearest fit is any operation in which parcels arrive in unpredictable orientation and in volume. E-commerce retailers running their own returns centres are an obvious example: returned items come back in reused packaging, with labels placed wherever there was space, and each one has to be identified, weighed and measured before it can be inspected or restocked. Retail chains handling store and customer returns face the same problem at a different scale.

Third-party logistics providers and distribution centres form the second group. For them, the system serves warehouse and distribution induction, the moment at which inbound parcels are given an identity and a set of measurements before they enter storage or sorting. Sites that unload loose parcels from trucks gain further from the telescopic conveyor option, which links the trailer directly to the measuring line.

A third group is operators planning a complete parcel line in stages. Because the system is modular and sorting machines can be added at its end, it can be installed first as a measurement and identification point and extended later. Buyers planning that downstream stage may wish to review Senad Automated Parcel Sorting Solutions, while those comparing other measuring options in the range can look at Senad Automatic Dimension Weight Scanning; Robots Europa can advise on which combination suits a given site. The wider selection of logistics automation is collected under Warehouse Robots.

What is the Senad Six Sides Dynamic DWS System used for?

1. E-commerce reverse logistics: identifying, weighing and measuring returned parcels as they enter the returns process.
2. Retail returns: capturing a data record for each returned item regardless of how the label faces.
3. Warehouse and distribution induction: giving inbound parcels an identity and measurements before storage or sorting.
4. Truck unloading lines: taking parcels straight from the container via the optional telescopic conveyor.
5. Feeding a sorting stage: supplying identified, measured parcels to modular sorting machines installed at the end of the line.
6. Exception management: separating parcels that need attention into the abnormal handling section without halting the main flow.

Pricing and Availability

The Senad Six Sides Dynamic DWS System is configured to the site: the optional telescopic conveyor, any sorting modules at the end of the line and the software integration all shape the final scope. For that reason, Robots Europa supplies it on quotation, prepared once your parcel profile, line layout and data requirements are known. Delivery, customs and support are arranged together with the quotation. To begin, send your project details through the quotation request available on this page.

Frequently Asked Questions

Does the system have to be assembled on site?

No. The machine is fully assembled, commissioned and tested before shipment.

How is the machine started in daily operation?

Once the Vision App is opened, the machine starts to work.

Can the system be serviced remotely?

Yes. A remote App is installed on the desktop of the PC, which provides the route for remote service.

What throughput does the system achieve?

With weight, volume and barcode all measured dynamically, the system processes more than 2400 pieces / hour.

Can the measurement data be passed to our own software?

The system offers a rich software interface and customisable software. Robots Europa discusses the integration with your existing systems when scoping the project.

What happens to parcels that cannot be processed normally?

They are directed to the abnormal handling section, one of the three parts of the machine, so the main flow continues uninterrupted.

Where can I buy the Senad Six Sides Dynamic DWS System and what does it cost?

The system is available from Robots Europa, which supplies customers across the EU and the DACH region. The cost depends on the configuration, so it is given in a quotation prepared for your project.

Summary

The label-down parcel at the returns desk is a small problem that repeats thousands of times a day, and the Senad Six Sides Dynamic DWS System is designed to make it disappear. Six cameras on the top and five sides raise the code reading rate, dynamic weighing and volume measurement keep parcels moving at more than 2400 pieces / hour, and a dedicated abnormal handling section takes care of what remains. Its modular build, optional telescopic infeed and sorting modules at the end let it slot into an existing line, and it arrives assembled, commissioned and tested. For operators in the EU and the DACH region looking to take orientation out of the equation, a quotation from Robots Europa via this page is the starting point.