BMR Concrete Finishing Robot

A finishing robot that maps a freshly poured slab and then trowels and polishes it on its own, with remote control available whenever the site calls for a steadying hand. Robots Europa supplies it to contractors who finish large concrete floors in basements, factories, airports, shopping malls and plazas.

In stock

BRAND:
BMR
MODEL:
CONCRETE FINISHING ROBOT 80SZ
ORIGIN:
China
Warranty:
12 MONTHS
AVAILABILITY:
ALLOW 6-8 WEEKS FOR DELIVERY
SKU:
BMR-Concrete-Finishing-Robot
€69,323.70
Free Shipping
Loading...

BMR Concrete Finishing Robot

Before a single blade turns, this robot has to understand the floor. A fresh slab in a basement, a factory hall or an airport terminal is, to a machine, unmapped territory with a deadline attached, because the concrete keeps setting whether the plan is ready or not. The BMR Concrete Finishing Robot answers that problem by charting the surface first with SLAM mapping and then working it in fully automatic passes: compaction, slurry lifting, surface finishing and polishing, all through an 800mm finishing disc whose blades turn at anywhere between 0 and 150r/min. A single-pass efficiency of ≥300㎡/h and an automatic navigation deviation of ≤200mm describe a machine closer to a surveyor that happens to carry a trowel than to a hand tool. When the site calls for a human hand, the same unit switches to remote control.

Robots Europa, based in Dublin, supplies the Concrete Finishing Robot 80SZ to flooring contractors, general contractors and facility builders across the European Union and the DACH region. Robots Europa prepares the quotation, arranges delivery to site and remains your point of contact for support once the machine is working on your slabs.

Background

Shenzhen BrightMaster Robotics and the BMR range

The 80SZ is built by Shenzhen BrightMaster Robotics Co., Ltd., whose BMR machines address individual stages of concrete construction. Within that family, the finishing robot occupies the stage after the concrete has been placed and levelled. It is the machine that turns a freshly cast surface into a finished floor. Construction robotics of this kind has grown out of an observation familiar to any site manager: the most repetitive and physically demanding tasks on a pour are also those where consistency matters most, which makes them natural candidates for automation. Robots Europa offers the finishing robot alongside other BMR machines in its Concrete Robots category, so that several stages of slab work can be planned and discussed together.

Mapping, navigation and control

The manufacturer names four technical foundations for the robot: SLAM mapping, a fully automatic navigation system, integrated intelligent motion control algorithms and real-time control technology. SLAM, or simultaneous localisation and mapping, lets a mobile machine build a map of its surroundings while tracking its own position within that map. This is what allows the robot to plan coverage of a large cast-in-place surface without fixed guide rails. The navigation system then drives those passes automatically, holding automatic operation navigation deviation to ≤200mm. Motion control and real-time control link the chassis to the finishing disc, so that the trowelling action and the travel of the machine are managed as one task rather than two. Buyers who intend to fit the robot into a digital site workflow should discuss integration with Robots Europa at an early stage.

Technical Specifications

SpecificationValue
ModelConcrete Finishing Robot 80SZ
Finishing disc diameter800mm
Weight340kg
Dimensions (LxWxH)1600x900x1310mm
Single-pass operating efficiency≥300㎡/h
Blade rotation speed0~150r/min
Automatic operation navigation deviation≤200mm
Power supply48V 160AH
Operating endurance≥4h
Charging time≤4h
Operating temperature0~45°C

Specifications are as published by the manufacturer and are confirmed against the datasheet at quotation.

The manufacturer has not published the box contents, the IP rating, the motor power, a flatness tolerance, details of the software or app, the sensors, a service life independent of the warranty or any certifications; Robots Europa confirms these at quotation.

How does a finishing robot differ from a ride-on power trowel?

On most sites, large-area finishing is carried out with walk-behind or ride-on power trowels, each of which needs a skilled operator for every hour it runs. The quality of the floor then depends on how evenly that operator overlaps the passes, how attentively blade speed is adjusted as the concrete stiffens, and how fatigue changes the work towards the end of a long pour. The 80SZ moves many of those decisions into the machine itself. In fully automatic mode it plans and executes coverage from its own map, and its blade rotation is variable across 0~150r/min, so the action can follow the concrete from early compaction and slurry lifting through to final polishing.

The operator's role therefore changes from steering to supervising: watching the surface, judging the timing of each stage and taking over in remote-control mode where the layout or the programme makes that sensible. What the robot does not replace is the finisher's experience of when the concrete is ready to be worked. That judgement remains a human one, and the robot is best understood as the means of carrying it out consistently across a very large area.

What does a single charge of the 80SZ cover?

The robot runs from a 48V 160AH power supply, with operating endurance of ≥4h and a charging time of ≤4h. Because recharging takes no longer than the machine's minimum working time, a contractor planning a long pour can schedule charging around the finishing windows of different sections, or discuss with Robots Europa whether a second unit alternating with the first would suit the programme. The operating temperature range of 0~45°C covers enclosed basements as well as open plazas in warm weather, while pours in sub-zero conditions fall outside it. At 340kg and 1600x900x1310mm, the robot is a compact machine to move between sections and levels, although access routes and lifting arrangements on site should be checked against those dimensions in advance.

Who is the BMR Concrete Finishing Robot for?

The first group is specialist concrete flooring contractors who finish large areas week after week and want consistent output without depending entirely on the availability of experienced trowel operators. For them, the combination of automatic coverage and remote control means one supervisor can keep the robot productive while the crew concentrates on edges, details and timing.

The second group is general contractors delivering basements, shopping malls, factories and airport buildings, where finishing is one critical stage among many and a predictable rate of work simplifies the programme. Owners and developers of industrial facilities who commission their own floors form a third group, particularly where a repeatable process is valued as highly as the result itself.

The sources name a single version, the 80SZ, so there is no alternative trim to choose between. Buyers planning the earlier and later stages of slab work, such as levelling, screeding, grinding or coating, will find the related BMR machines in the Concrete Robots category and can include them in the same enquiry.

What is the BMR Concrete Finishing Robot used for?

  1. Basement slabs: finishing large enclosed floors where the robot works systematically from its own SLAM map.
  2. Factory floors: compaction, finishing and polishing of extensive production-hall surfaces in repeated automatic passes.
  3. Airport buildings: working the wide cast-in-place areas typical of terminals and associated facilities.
  4. Shopping malls: finishing broad retail floor plates where a steady rate of progress keeps follow-on trades on schedule.
  5. Plazas: treating open concrete surfaces within the machine's 0~45°C operating range.
  6. Supervised remote work: switching to remote control for sections where the operator prefers to steer the machine directly.

Pricing and Availability

Robots Europa supplies the Concrete Finishing Robot 80SZ on quotation, so that the offer reflects your project, your site conditions and the documentation you require. Delivery, customs clearance and support are arranged with the quotation. Please let us know the scale of your slabs and any technical questions you would like answered. A quotation for the BMR Concrete Finishing Robot can be requested through the enquiry form available on this page.

Frequently Asked Questions

Which tasks does the robot perform?

It carries out large-area concrete compaction, slurry lifting, surface finishing and polishing on cast-in-place concrete surfaces. These stages are handled by its 800mm finishing disc with blade speed adjustable between 0~150r/min.

Does the robot need an operator?

It supports both a fully automatic mode and a remote-control mode. In automatic mode it navigates using SLAM mapping, while remote control allows an operator to steer it directly whenever required.

How accurately does it follow its planned path?

The automatic operation navigation deviation is ≤200mm. This figure refers to navigation, not to the flatness of the finished floor.

How long does it work per charge, and how long does charging take?

Operating endurance is ≥4h from its 48V 160AH power supply. Charging time is ≤4h.

In which temperatures can it operate?

The operating temperature range is 0~45°C. Pours below freezing therefore fall outside its working range.

Does the robot carry CE marking or other certifications?

Certifications, CE marking included, are among the points listed beneath the specification table. Robots Europa addresses the conformity documentation for EU and DACH delivery in its offer.

Where can I buy the BMR Concrete Finishing Robot and what does it cost?

You can buy it from Robots Europa, which supplies customers across the EU and the DACH region. The cost is set out in an individual quotation that includes delivery, customs and support, and you can request it on this page.

Summary

The 80SZ treats a fresh slab as a territory to be charted before it is worked: SLAM mapping, automatic navigation within ≤200mm and integrated motion control turn large-area finishing into a planned process rather than a sequence of hand-steered passes. Its 800mm disc, variable blade speed and ≥300㎡/h single-pass efficiency cover compaction through to polishing, and remote control keeps the operator in charge wherever direct steering suits the site better. For contractors who finish basements, factories, airports, shopping malls and plazas, and who want that work mapped, measured and repeatable, this page is the starting point.

Specifications

Runtime

General

BRAND BMR
MODEL CONCRETE FINISHING ROBOT 80SZ
ROBOT USE INDUSTRIAL

Physical

LENGTH 160.0 cm
WIDTH 90.0 cm
DEPTH 131.0 cm
WEIGHT 340 kg

Performance

OPERATING TEMPERATURE 0°C TO 45°C

Battery + Power

RUNTIME ≥4 h
BATTERY CAPACITY 48V / 160Ah
CHARGING TIME ≤4 h

Hand

POSITIONING ACCURACY ≤200 mm

Source Details

RATED POWER Finishing disc diameter: 800 mm. Single-pass operating efficiency: ≥300 m²/h. Blade rotation speed: 0–150 r/min.

Product Questions

No questions yet. Be the first to ask.

0/255

Downloads

Write a Review
You're reviewing: BMR Concrete Finishing Robot
loader
Loading...

You submitted your review for moderation.