DISCONTINUED - Deep Robotics X20 Industrial Quadruped Robot Dog

Not every buyer searching for an industrial robot dog wants the newest machine on the market. Some already run a fleet and need to keep it consistent; others want to understand the platform from which the current generation grew. The DISCONTINUED - Deep Robotics X20 Industrial Quadruped Robot Dog belongs to that conversation: a legged inspection robot designed for patrol rounds under extreme working conditions, sealed against dust and water, and built as a modular carrier for the sensors an inspection task demands. Its discontinued status changes how it is bought, not what it was designed to do.

Robots Europa, based in Dublin, handles enquiries about the X20 for customers across the EU and the DACH region. Robots Europa quotes for the robot where it can still be supplied, arranges delivery and customs within Europe, and advises on support for units already in service, as well as on the current models that follow on in the same range.

Background

DEEP Robotics and its range

DEEP ROBOTICS develops quadruped robots for industry, research and education. Its range today spans the X Series of industrial quadrupeds, the wheeled-legged LYNX platform and the Lite3 family for academic and research work. The X20 sits in the industrial line: a robot intended not for demonstration or the laboratory bench, but for the repetitive, often unpleasant inspection rounds that keep plants, yards and utility sites running safely.

Legged robots of this class address a specific problem. Wheeled and tracked inspection vehicles perform well on smooth, level floors, yet industrial sites are rarely like that. Stairs link levels, cable trays and pipework cross walkways, and outdoor areas turn to mud, gravel or standing water depending on the season. A quadruped places its feet individually, so it can step over obstacles and climb stairs that would stop a wheeled platform.

Positioning: a sealed, modular inspection carrier

The X20 is a quadruped robot solution for industrial patrol inspection under extreme working conditions. Two design choices support that positioning. First, the robot carries an IP66 rating for dust and water resistance, intended for adverse conditions rather than clean indoor environments. Second, it is built around a modular architecture with a plentiful supply of interfaces, so that peripherals can be integrated without redesigning the robot.

That modularity is the heart of the platform. The X20 can be equipped with cameras, robotic arms, LiDAR units, gas sensors and more, allowing a payload to be configured for the industrial task in hand. On the software side, the X20 supports precise navigation, dynamic obstacle avoidance, terrain recognition and human-robot interaction.

Technical Specifications

Specifications as published by the manufacturer from laboratory data; confirmed against the datasheet at quotation.

The manufacturer has not published the battery capacity, charging time, operating temperature range, onboard processor, sensor models, communication interfaces, degrees of freedom, software or SDK details, or what is in the box; these are confirmed at quotation.

What makes the X20 suited to harsh industrial sites?

Three of its characteristics work together. The first is terrain capability. The X20 adapts to 20 cm obstacles and stairs, 30° slopes, grass, sand, snow, gravel and standing water. For an inspection route, this means the robot can follow the path a human inspector would take, including the stairways and rough outdoor stretches that usually force a wheeled robot onto a shorter, less useful route.

The second is protection. With an IP66 rating, the robot is designed to withstand dust and water jets, which matters on sites where rounds cannot be postponed because of rain or where airborne dust is part of normal operation. An inspection robot that must be kept indoors in bad weather leaves gaps in exactly the conditions where faults tend to develop.

The third is load-carrying capacity. A payload capacity of 20 kg leaves room for more than a single camera: an inspection head, a gas sensor and a LiDAR unit can be combined, or a robotic arm fitted where the task calls for manipulation. Combined with a maximum speed of at least 4 m/s, an endurance of 2 to 4 hours and a mileage of 15 km, the X20 is specified for covering a sizeable site on a single patrol rather than one building at a time.

Should I buy a discontinued model such as the X20?

That depends on why you are buying. For an organisation that already operates X20 units, an additional robot or replacement can keep a fleet uniform: the same payload integrations, the same operator training and the same inspection routines. For a team that wants to integrate its own peripherals onto an established industrial quadruped, the X20's modular design and interfaces remain the relevant features.

For a new deployment planned for many years of service, a current model is usually the more prudent starting point, as long-term parts and software support for a discontinued product should be clarified before purchase. Robots Europa sets out what can be supplied and supported for the X20 in each quotation, so that the decision rests on documented terms rather than assumptions.

Who is the DISCONTINUED - Deep Robotics X20 Industrial Quadruped Robot Dog for?

The X20 is aimed first at industrial operators who run regular patrol inspections: utilities, process plants, energy sites and large industrial estates where the same route must be walked repeatedly and where conditions on that route are not always kind. It also suits system integrators who build inspection solutions around a mobile carrier and need a robust base with interfaces for cameras, LiDAR, gas detection or a manipulator.

Existing X20 operators form a distinct group: they are usually less interested in comparison than in continuity, and want to know what can still be sourced and serviced. Buyers starting an industrial fleet from scratch may wish to look at the current Deep Robotics X30 Industrial Quadruped Robot Dog and the Deep Robotics X30 Pro Industrial Quadruped Robot Dog alongside the X20. Universities and research groups whose work centres on locomotion and algorithms rather than field inspection will generally find the Lite3 family a closer fit, and the wider Standard Quadrupeds category shows the full range of legged platforms.

What is the DISCONTINUED - Deep Robotics X20 Industrial Quadruped Robot Dog used for?

1. Routine patrol inspection: walking fixed inspection rounds across industrial sites so that staff are dispatched only when something needs attention.
2. Gas monitoring: carrying gas sensors along routes where leaks are a risk and early detection reduces exposure for personnel.
3. Visual and thermal checks: fitting cameras to record gauges, equipment condition and anomalies on each round for later review.
4. Mapping and surveying: mounting LiDAR units to capture the layout of plants, tunnels or outdoor areas for navigation and documentation.
5. Remote manipulation: equipping a robotic arm for tasks such as operating controls or handling objects in places people should avoid.
6. All-weather outdoor rounds: continuing inspections across gravel, snow, grass and standing water when conditions would deter a wheeled platform.

Pricing and Availability

As the X20 is a discontinued model, availability is handled case by case, and Robots Europa provides pricing only by individual quotation. Please describe your application, the payload you intend to fit and whether you already operate X20 units, and Robots Europa will set out what can be supplied and supported. Delivery, customs and support are arranged together with the quotation. To begin, the quotation request form is available on this page.

Frequently Asked Questions

Is the Deep Robotics X20 still in production?

No. The product is listed as discontinued, and Robots Europa sets out in each quotation what can still be supplied and how it can be supported.

How much can the X20 carry?

The X20 has a payload capacity of 20 kg, which is available for peripherals such as cameras, LiDAR units, gas sensors or a robotic arm.

Can the X20 operate in rain and dust?

Yes. The X20 has an IP66 rating for dust and water resistance and is designed for adverse conditions.

Can the X20 climb stairs?

Yes. It adapts to 20 cm obstacles and stairs as well as 30° slopes.

How long does the X20 run on a charge?

The X20 has an endurance of 2 to 4 hours, with a mileage of 15 km.

Which sensors are included?

The X20 is designed as a modular carrier: cameras, LiDAR units, gas sensors, robotic arms and other peripherals can be integrated through its interfaces. The configuration is agreed with Robots Europa as part of the quotation.

Where can I buy the DISCONTINUED - Deep Robotics X20 Industrial Quadruped Robot Dog and what does it cost?

Robots Europa supplies the X20, where available, to customers in the EU and the DACH region. The cost depends on configuration and availability and is provided by individual quotation.

Summary

The X20 makes its case not as the newest robot dog but as a proven industrial pattern: a sealed, IP66-rated quadruped that walks stairs, slopes and wet ground, carries a 20 kg payload and accepts the cameras, LiDAR units, gas sensors and arms an inspection task requires. For operators maintaining an X20 fleet, integrators building on its modular interfaces, or buyers weighing it against the current X Series, the right decision starts with clear terms on supply and support, which Robots Europa sets out in every quotation. Whether you need one more X20 or a route to its successors, this page is the starting point.